The reinforcement processing shed is a site for reinforcement processing operations such as straightening, bending, and welding of reinforcement on the construction site. The length and width of the steel bar processing shed should be determined based on the number of steel bars processed and the number of machines used. Generally, there are 6 ×

9m、6×

9m、6 ×

12m、9×12m等幾種，可以根據實際情況酌情采用，也可自行設計長寬尺寸。

12m、9 × Several types, such as 12m, can be used according to actual conditions, or you can design your own length and width dimensions.

工地鋼筋棚的搭設還要注意一下幾點：

The following points should be paid attention to when erecting the reinforcement shed on the construction site:

1.工具式鋼筋加工棚搭設具體尺寸根據現場實際情況確定。

The specific size of the tool type reinforcement processing shed shall be determined based on the actual situation on site.

2.搭設在塔吊回轉半徑和建筑物周邊的加工車間設置雙層硬質防護。

2. The processing workshop set up around the turning radius of the tower crane and the building shall be provided with double layer hard protection.

3.加工車間地面需硬化，宜選用砼地面。

The ground of the processing workshop needs to be hardened, and concrete ground should be selected.

4.加工車間頂部應張掛警示標識和宣傳用語的橫幅，橫幅寬度宜為1m。

The top of the processing workshop should be hung with safety warning signs and safety propaganda banners, with a width of 1m.

5.工具式鋼筋加工棚需在醒目處掛操作規程圖牌，圖牌的尺寸為：寬×高=2000mm×1000mm。

5. The tool type reinforcement processing shed shall be hung with an operation specification drawing board at a conspicuous place, and the size of the drawing board is: wide × Height=2000mm × 1000mm。

6.各種型材及構配件規格為參考值，具體規格應根據當?shù)仫L荷載、雪荷載進行核算。

6. The specifications of various profiles and components are reference values, and the specific specifications should be calculated based on local wind load and snow load.

7.南方地區，如遇臺風應采取防風措施，可設置纜風繩。

In the southern region, in case of typhoon, wind prevention measures should be taken, and wind cables can be installed.