Climbing net refers to the external scaffold with anti overturning and anti falling devices,which is erected at a certain height and attached to the engineering structure and can climb or fall layer by layer with the engineering structure by relying on its own lifting equipment and devices;Attached lifting scaffold is mainly composed of attached lifting scaffold frame structure,attached support,anti tilting device,anti falling device,lifting mechanism and control device.

 

 

　　特點

 

　　characteristic

 

　　1.低碳性

 

　　1.Low carbon

 

　　2.節約鋼材用量70%3.節省用電量95%4.節約施工耗材30%

 

　　2.Save 70%of steel consumption 3 Save power consumption by 95%4 Save 30%of construction consumables

 

　　3.經濟性：45米以上的建筑主體均適用。樓層越高經濟性越明顯，每棟樓可綜合節約30%-60%成本。

 

　　3.Economy:it is applicable to buildings above 45 meters.The higher the floor is,the more obvious the economy is.Each building can comprehensively save 30%-60%of the cost.

 

　　4.實用性：可應用于各種結構的建筑主體

 

　　4.Practicability:it can be applied to the main building of various structures

 

　　5.性：采用全自動同步控制系統和遙控控制系統，可主動預防不狀態，并采用多重設置的星輪防墜落裝置防止復位裝置失效等故障，能夠防護架體始終處于狀態，有效防墜。

 

　　5.Safety:the full-automatic synchronous control system and remote control system are adopted,which can actively prevent unsafe States,and the star wheel fall prevention device with multiple settings is adopted to prevent failures such as failure of reset device,so as to protect the frame from falling down effectively.

 

　　6.智能化：采用微電腦荷載技術控制系統，能夠?qū)崟r顯示升降狀態，自動采集各提升機位的荷載值。當某一機位的荷載超過設計值的15%時，以聲光形式自行報警并顯示報警機位;當超過30%時，該組升降設備將自動停機，直故障排除。有效避免了超載或失載過大而造成的隱患。

 

　　6.Intellectualization:microcomputer load technology control system is adopted,which can display the lifting status in real time and automatically collect the load value of each lifting position.When the load of a position exceeds 15%of the design value,it will give an alarm in the form of sound and light and display the alarm position;When it exceeds 30%,this group of lifting equipment will stop automatically until the fault is eliminated.It effectively avoids the potential safety hazards caused by overload or excessive load loss.

 

　　7.機械化：實現低搭高用功能。在建筑主體底部一次性組裝完成，附著在建筑物上，隨樓層高度的增加而不斷提升，整個作業過程不占用其它起重機械，大大提高施工效率，且現場環境更人性化，管理維護更輕松，文明作業效果更突出。

 

　　7.Mechanization:realize the function of low building and high use.It is assembled at the bottom of the main building at one time and attached to the building,which continues to improve with the increase of floor height.The whole operation process does not occupy other lifting machinery,which greatly improves the construction efficiency.In addition,the on-site environment is more humanized,the management and maintenance are easier,and the effect of civilized operation is more prominent.

 

　　8.美觀度：突破傳統腳手架雜亂的外觀形象，使施工項目整體形象更加簡潔、規整，能夠更有效、更直觀展現施工項目的文明形象。

 

　　8.Aesthetics:break through the messy appearance image of traditional scaffolds,make the overall image of the construction project more concise and regular,and show the safe and civilized image of the construction project more effectively and intuitively.

 

　　以上的內容就是關于施工爬架防護網的特點進行分享的內容，從多個方面進行分享，同樣如果大家還有其他的相關疑問的話歡迎進行來電，我們會為您進行竭誠服務！

 

　　The above content is about the characteristics of the construction climbing frame safety protection network,which can be shared from many aspects.Similarly,if you have other relevant questions,you are welcome to call and we will serve you wholeheartedly!